V3 BRASS NOZZLE 0.4MM

Product features:

• Exquisite design: Raise3D V3 Brass Nozzle is exquisitely designed to effectively prevent filament leakage at the hot end and to provide a smooth, glossy and consistent printing finish. The internal grooves and protrusions are carefully conceived to reduce resistance on corners, and the chamfer design is used to reduce the loss of filament.
• High-quality material: Raise3D V3 Brass Nozzle is made of high-quality brass material, which does not rust or corrode easily. The brass nozzle is durable and easy to install.
• Smooth surface: The smooth surface allows the nozzle to connect to the hot end smoothly to avoid leakage of filament, and achieve a smooth and neat printing finish.
• High precision: The inner wall of the nozzle of the 3D printer extruder is smooth without burrs, and the viscosity coefficient is small. The diameter variation of the extruder nozzle is less than 0.02 mm, produces smooth extrusion when printing.
• Applicability and compatibility: Raise3D V3 Brass Nozzle is suitable for Raise3D Pro3 Series, Pro2 Series and E2 printers.

Compatible filaments:

Compatible with various filaments: PLA / ABS / HIPS / PC / TPU / TPE / NYLON / PETG / ASA / PP / PVA / Glass Fiber Infused / Carbon Fiber Infused / Metal Fill / Wood Fill.

Printing tips:

The brass nozzle is suitable for printing non-abrasive filaments such as PLA or ABS that do not contain certain additives. Using filaments with additives such as glass, carbon fiber or metal particles will accelerate the wear of the brass nozzle and greatly reduce its service life.

The grooves and ridges inside the nozzle are prone to damage, which can block the nozzle or increase the diameter of the nozzle orifice and make it unusable.

Safety warning:

• During the printing process, the temperature of the nozzle is very high, please do not touch the nozzle directly.
• When disassembling the nozzle and the hot end, please wear the heat-insulating gloves provided to prevent burns.
• After replacing the nozzle, be sure to recalibrate the distance between the nozzle and the printing plate, and also calibrate the height of the left and right nozzles to achieve a smooth printing experience.