ORTUR 24V Laser Engraver 2 Pro-S2-LF

NOTE

LU2-4-LF is good at engraving and better at cutting, and could support a higher speed.

 It is not that the smaller the light spot, the better the effect when engraving photos. You may need to increase the laser spot to get a better picture effect.

 The competitors may falsely promote the power of similar laser modules as 40W, or even 60W, please take care.

It has a longer Focal Length, so it has a longer Depth of Field, but a bigger Focal Spot.

 Extra Accessories: Safety Glasses, 10PCS Metal Business Cards, 2PCS Color Paper, 4PCS Pet ID Tags.

MUCH BETTER EFFECT

This laser engraver supports PWM mode.

Pre-assembled parts, just need 10 - 20 minutes to install the machine.

400 x 400 mm large engraving area.

Aluminum profile frame + structured cabling, solid structure, smooth operation, attractive appearance

Synchronizing shaft mechanical structure, avoid out-sync on two Y rails, during full speed engraving.

UPGRADE MOTHERBOARD

 Specialized Motherboard with 32Bits MCU. It could pre-process 32 instructions, support baud rate as high as 921600, which is much more powerful!

The Most Advanced 32Bits Laser Engraver Firmware-ORTUR laser master firmware, smarter, faster, higher precision and easier to use.

 Laser power range could be S0 - S1000, compared to 8Bits desktop laser engravers, which only has S0 - S255, ORTUR Laser Master could control laser beam more accurately, could even use the high power laser unit to "draw" a picture on paper , that the 8Bits high power laser engravers could not do.

 Engraving speed could be as high as 3000mm/Min. ( If do not consider the laser carving result, the velocity of movement could be as high as 1000MM/S ).