MakerBot METHOD X RapidRinse and ABS-R Filament 9 Pack (6 ABS-R, 3 RapidRinse)

Makerbot METHOD X ABS-R and RapidRinse 9-Pack 

(6 ABS-R, 3 RapidRinse)

MAKERBOT METHOD X ABS-R FILAMENT

ABS WITH SUPERIOR PRINTING RELIABILITY, PERFORMANCE, AND EASE OF USE.

ABS-R is a new ABS formulation that provides superior printing reliability and performance with a 98% jam reduction for consistent, repeatable ABS prototypes, tools, and parts.

Works with RapidRinse™ Fast Dissolving Support.

SPOOL TYPE
Smart Spool™ provides valuable information including material type, color, and amount remaining via an RFID chip directly to MakerBot Print, while a desiccant in the spool maintains a low moisture level inside the drawer bay.

DIMENSIONS AND WEIGHT

Spool Diameter: 21.8 cm (8.6 in)

Spool Width: 4.2 cm (1.65 in)

Material Diameter: 1.75 mm

Shipping Weight: 1.1 kg (2.4 lb)

Net Weight: 0.65 kg (1.43 lb)

STORAGE ENVIRONMENT

Store in the included a vacuum-sealed metalized polyester bag to avoid moisture absorption from air; long-term exposure to humidity can compromise material quality and performance. Make sure the built-in desiccant is in the spool to absorb any moisture exposure during the material loading process.

MAKERBOT METHOD X RAPIDRINSE FILAMENT (0.45KG, 1LB)

FAST DISSOLVING SUPPORT MATERIAL

Print dimensionally accurate ABS parts with the ease of PLA. Print your parts with confidence in ABS-R and RapidRinse™, drop your part into tap water, and watch the supports dissolve to nothing in just minutes. Only on METHOD X.

COMPATIBILITY

Printers:

METHOD X
METHOD X Carbon Fiber

Extruders:

Model 1XA Extruder
Model 1C Extruder
LABS GEN 2 Experimental Extruder

Support Materials:

MakerBot RapidRinse
PRINTER COMPATIBILITY
MakerBot METHOD X

EXTRUDER COMPATIBILITY
Support 2XA Extruder

MATERIAL COMPATIBILITY
ABS-R

SPOOL TYPE

Smart Spool™ provides valuable information including material type, color, and amount remaining via an RFID chip directly to MakerBot Print, while a desiccant in the spool maintains a low moisture level inside the drawer bay.

DIMENSIONS AND WEIGHT

Spool Diameter: 21.8 cm (8.6 in)

Spool Width: 4.2 cm (1.65 in)

Material Diameter: 1.75 mm

Net Weight: 0.45 kg (1.0 lb)

STORAGE ENVIRONMENT

Store in the included a vacuum-sealed metalized polyester bag to avoid moisture absorption from air; long-term exposure to humidity can compromise material quality and performance. Make sure the built-in desiccant is in the spool to absorb any moisture exposure during the material loading process.