MakerBot METHOD X ABS-R Filament Red (0.65kg,1.43lb)

COMPATIBILITY

Printers:

METHOD X

METHOD X Carbon Fiber

Extruders:

Model 1XA Extruder

Model 1C Extruder

LABS GEN 2 Experimental Extruder

Support Materials:

MakerBot RapidRinse

SPOOL TYPE

Smart Spool™ provides valuable information including material type, color, and amount remaining via an RFID chip directly to MakerBot Print, while a desiccant in the spool maintains a low moisture level inside the drawer bay.

DIMENSIONS AND WEIGHT

Spool Diameter: 21.8 cm (8.6 in)

Spool Width: 4.2 cm (1.65 in)

Material Diameter: 1.75 mm

Shipping Weight: 1.1 kg (2.4 lb)

Net Weight: 0.65 kg (1.43 lb)

STORAGE ENVIRONMENT

Store in the included a vacuum-sealed metalized polyester bag to avoid moisture absorption from air; long-term exposure to humidity can compromise material quality and performance. Make sure the built-in desiccant is in the spool to absorb any moisture exposure during the material loading process.

MATERIAL PROPERTIES

Properties

Test

ABS-R

Tensile Strength (MPa)

ASTM D648
41

Tensile Modulus (MPa)

ASTM D648

2400

Strain at Yield (%)

ASTM D648

2.3
Strain at Break (%)

ASTM D648

33.4

Flexural Strength (MPa)

ASTM D790

79

Flexural Modulus (MPa)

ASTM D790

2600

Izod Notched Impact Strength (J/m)

ASTM D256

129 – C/H

Izod Unotched Impact Strength (J/m)

ASTM D256

970 - C

Heat Deflection Temperature – 64 psi  (C)

ASTM 648

105

Heat Deflection Temperature – 264 psi  (C)

ASTM 648

102