MakerBot METHOD X ABS Filament Red (.65kg, 1.43lb)

MakerBot METHOD X ABS Filament Red (.65kg, 1.43lb)

Printer Compatibility

Method X.

Extruder Compatibility

Material Extruder 1XA

Support Extruder 2XA

Support Material

Stratasys® SR-30

Dimmensional Accuracy

Finished part dimensional accuracy of ± 0.2mm (± 0.007in)

TECH SPECS                             Imperial         Metric

Heat Deflection (ASTM 648, 66 psi)             210°F         99°C

Flexural Modulus (ASTM D790, 15 mm/min) 377,000 psi 2,600 MPa

Tensile Strength at yield (ASTM D638, 50 mm/min) 0.806 psi 43 MPa

Tensile Modulus (ASTM D638, 50 mm/min) 348,000 psi 2,400 MPa

Strain at Yield - Elongation (%)                         >5.6% >5.6%

Notched Impact Strength (ASTM D256)         3.6 ft-lb/in 192 J/m

WARNING

This Filament - when used in the operation of 3D Printers or 3D Pens - can expose you and others in the same room to styrene, a chemical known to the State of California to cause cancer.